Solargain Health Check

Model
P-IS-BACKUP-1P-63A (1 Phase)
P-IS-BACKUP-3P-63A (3 Phase)
Product Features
Cumulative energy check compared to an expected production to date
Verifying the connection strength of cable terminations
Checking the integrity of conduit sealing
Inspecting for corrosion of terminals
Testing shut-down and restart of system
Voltage and current check of input cables (as assessed against the weather conditions at that time)
Testing of earth fault alarms
Brush down of dust and dirt from inverter casing and heat grilles
Minor repairs/replacements to any issues that we uncover from the above checks
Product Warranty
2 Year Warranty

A scheduled solargain solar health check will ensure your solar production curve is professionally optimised.

Solar Bell Curve

Are you experiencing issues with your solar system? This may be due to faulty panels, wiring, inverter or even grid issues. Determining the cause of an underperforming solar system can be tricky, which is why you should always get CEC Accredited Installers and Designers to check your equipment.

Our solar technicians are fully licensed professionals who will help you get the most out of your solar power equipment, whether it was installed with us or not. They’ll check your installation thoroughly, detect and correct any existing issues, and determine their origin in order to prevent them from causing failures in the future.

  • You’ve noticed that your inverter is switching off and trying to restart during the day: this may be because the grid tolerance parameter is set too low, the grid voltage at your property is set too high or because of a faulty meter.
  • Your isolator is burned out and the export to the grid is dropping: this can be due to a poorly terminated, tightened or polarised cable.
  • One of your panels has failed by going into open circuit: there might be a diode failure that’s causing your inverter to run at a small percentage of its capability.
  • Your inverter is failing to start in summer: this is probably due to the hot temperature of the panels and can be fixed by spraying panels with cold water or installing additional panels.

 

Get your solar health check quote