SMA is a German brand of inverters usually coloured red but also blue, yellow and beige. They have been installed by Solargain from 2009 until present. Many models have now been discontinued such as the Sunny Boy 1100/1600/1700. SMA inverters initially came with a 5-year warranty with the option to extend it to 10 years.
Aurora inverters were manufactured in Italy and imported to Australia by ABB. They came with a 5-year warranty and have been installed from 2010 to present.
Is your Aurora inverter displaying a W001 – Sun Low error message?
If your Aurora inverter has a W001 – Sun Low fault, it’s an indication that there’s either not enough sunlight hitting your panels or there may be an issue with your panels.
Hmm, is your Aurora inverter displaying an E031 – Int.Error? Solargain can help.
In short, if your Aurora inverter has an E031 - Int.Error a vital internal component has failed. The unit will need to be replaced.
Uh oh! Has your Orion inverter stopped working? Is it displaying ‘DC INJ High’ fault? Read on.
If your Orion inverter is telling you it has a DC INJ High fault, it’s possible that DC voltage is travelling through your inverter outside of tolerance limits. To prevent damage from occurring, your inverter will shut down.
Has your Orion inverter stopped working? Is it displaying ‘relay failure’? Please read on.
If your Orion inverter is indicating that it has experienced a relay failure, this means a component inside your inverter has failed. Without this component, the inverter cannot function and produce electricity.
Orion was a Taiwanese-manufactured inverter imported by an Australian wholesale company called Solar Energy Australia (SEA) as early as 2008 and installed by Solargain up until 2011. As they carried a 3- to 5-year warranty, they would now all require replacing.
Has your Orion inverter developed an isolation fault? Wondering what to do next?
An isolation fault in your Orion inverter is a sign that your solar panels may not be properly isolated. If it only seems to happen after rain, it’s likely that water is triggering the fault. If the isolation fault occurs constantly, regardless of moisture in the environment, further investigation will be needed.
Has your Orion inverter stopped working? Is it displaying a ‘No Utility' fault?
Is your Latronics inverter faulty? Is the 75% light flashing and are the remaining lights off?
If your Latronics inverter is displaying a 75% error, it may be having trouble connecting to the grid. Remember: if the 50% light is on solid while the 75% light is flashing, this is not a fault. It just means your inverter is on the cusp of 75% production.
By 2040 the International Energy Agency’s World Energy Outlook predicts that we will have more than doubled the worlds global solar capacity, from 103 gigawatts to 220 gigawatts.
